America's #1 Medical Alert Service for over 50 Years.
855-681-5351
Get Started

How to Program Your Replacement Lifeline Personal Help Button

Using the RESET or MESSAGE button on the home communicator:

  1. Press and hold down the RESET/MESSAGE button on the home communicator to enter test mode.
  2. Continuing to hold the RESET/MESSAGE button, hold the first wearable button to be autolearned. The communicator will make a 2 second tone, followed by a short beep, followed by a message stating the button has been programmed. You can release the wearable button at this time.
  3. If necessary, press and hold additional wearable buttons to be programmed one at a time, continuing to hold RESET/MESSAGE on the home communicator.
  4. Release the RESET/MESSAGE button.
  5. Press the RESET/MESSAGE button to exit test mode.