Using the RESET or MESSAGE button on the home communicator:
- Press and hold down the RESET/MESSAGE button on the home communicator to enter test mode.
- Continuing to hold the RESET/MESSAGE button, hold the first wearable button to be autolearned. The communicator will make a 2 second tone, followed by a short beep, followed by a message stating the button has been programmed. You can release the wearable button at this time.
- If necessary, press and hold additional wearable buttons to be programmed one at a time, continuing to hold RESET/MESSAGE on the home communicator.
- Release the RESET/MESSAGE button.
- Press the RESET/MESSAGE button to exit test mode.